CHINESE | ENGLISH
Industry news

SASO published the technical regulation for Jewelry and Decorative Accessories

The Saudi Standards, Metrology and Quality Organization (SASO) has published the technical regulation for Jewelry and Decorative Accessories.it shall be applied by 22 March 2023, Here are the highlights:


Scope

This regulation applies to jewelry and decorative accessories made of metals, plastics, glass or textiles. And precious metals, jewelry, plating and artifacts are excluded from the scope of this regulation.


General requirements

1、  The supplier shall carry out the conformity assessment procedures required in this technical regulation.

2、  The supplier shall provide information related to potential health, safety and environmental risks, in order to take preventive measures against such risks by the relevant authorities.

3、  The products shall be designed in a way that shall not violate the prevailing Islamic values and morals in the Kingdom.

4、  The metal part of the products shall not rust under normal use.

5、  Colors and dyes shall not transfer to skin and clothing under normal use.

6、  Beads and small parts shall be attached to the product so that it is difficult for children to remove them.


Technical requirements

1、  Shall comply with the technical requirements contained in the relevant standards set out in the following table:

No.

No. of the Standard

Title of the Standard

1

SASO-ISO-19095-3

Plastics — Evaluation of the adhesion interface performance in plastic-metal assemblies — Part 3: Test methods

2

SASO-1063

Toys – General Safety requirements

3

SASO-ISO-IEC-
GUIDE-50

Safety aspects – Guidelines for child safety in standards and other specifications

4

ASTM F2999:2019

Standard Consumer Safety Specification for Adult Jewelry

5

ASTM F2923:2020

Children’s jewelry safety standard

6

GSO EN 71-1

Safety Of Toys -Part 1 :Mechanical And Physical Properties

7

GSO EN 71-3

Safety Of Toys – Part 3: Migration Of Certain Elements

8

SASO GSO 1829

Technical requirements for woven fabrics garments

9

SASO ISO 527-1

Plastics – Determination of tensile properties – Part 1: General principles

10

SASO ISO 458-1

Plastics – Determination of stiffness in torsion of flexible materials – Part 1: General method

11

SASO ISO 178

Plastics -Determination of flexural properties

12

SASO ISO 23160

Watch cases and accessories – Tests of the resistance to wear, scratching and impacts

13

SASO ISO 14368-3

Mineral and sapphire watch-glasses – Part 3: Qualitative criteria and test methods

2、  Products shall not have sharp points or sharp edges.

3、  Shall clarify the warnings related to use.

4、  Shall provide information about the method of safe storage and disposal.


Chemical requirements

1、  The products shall use non-toxic chemicals.

2、  The content of the raw materials used in the manufacture of the product of harmful heavy metals such as: lead, nickel and cadmium within the permissible limits mentioned in the following table:

Substances

Limits

Lead (Pb)

0.05% by weight

Cadmium (Cd)

0.01% by weight

Nickel (Ni)

Earrings products inserted into the body
(migration amount for a week of normal use)

0.2 µg/cm²

The rest of the products attached to the body
(migration amount for a week of normal use)

0.5 µg/cm²

3、  The raw materials used in the manufacture of the product shall not cause skin allergies.

4、  The heavy metals used in the manufacture of the product shall not be toxic.

5、  The products shall not have a taste and smell resulting from the use of chemicals.


Environmental requirements

1、  The product shall be free of toxic or hazardous substances to the environment.

2、  The products shall be designed and manufactured in a way that achieves the sustainable use of natural materials, considering the reuse or recycling of these materials and their parts.


Packaging requirements

1、  Shall wrap the products with suitable packing materials.

2、  The products shall be assembled and packaged in a safe and right way during storage and transportation, in accordance with the requirements stipulated in the relevant standards.

3、  The used packaging materials shall be free of lead or any heavy metals.


PTS Testing Service Lab depends on abundant  technical experience and standardized management, thoughtful services, so our customers could avoid unnecessary or redundant tests, minimize the loss of costs, lighten the burden for the clients, and reduce the comprehensive test and inspection cost, struggling to upgrading market value and competitiveness towards the export-oriented cooperation. Helping enterprises to deal with technical trade barriers, reduce export risks.

Restricted Substances Testing
About us|Testing Services|Certification Services|Testing Laboratory|Download|Contact us
Copyright © CPC Certification_RoHS Testing_REACH Testing_CPSIA Testing - CPSC Test Lab  
PST